Loading containers properly: stowage, dunnage and moisture control
Goods that leave the factory in perfect condition can arrive dented or mouldy. Principles of stowage, moisture control and checks before sealing.
A container at sea faces constant vibration, tilting and temperature changes for weeks. Loading it properly is the cheapest way to cut claims.
Check the container before loading
- No holes or leaks, doors close tightly, door seals in good condition.
- A clean, dry floor with no odours or protruding nails.
- For food, ask for a clean container suitable for foodstuffs.
- Photograph the container's condition before loading.
Stowage principles
- Distribute weight evenly, with heavy goods at the bottom and centre, not all to one side.
- Leave no large gaps: use dunnage, airbags and timber bracing to secure the cargo.
- Packages marked "this way up" must be the right way up, and don't stack beyond the cartons' strength.
- Wooden pallets must meet ISPM 15 treatment standards.
- Don't exceed the maximum weight of the container or road limits.
Moisture control (container sweat)
When temperatures change, water vapour condenses on the ceiling and walls and drips onto the cargo, causing mould. It's especially dangerous for furniture, rattan and bamboo, dried agricultural products and paper.
- Control the cargo's moisture before loading.
- Hang container desiccant bags along the walls.
- Line the top of the cargo with kraft paper or moisture barrier film.
- Don't load in the rain or when goods are wet.
Loading records
- Photograph each layer, the full container, the seal and the container number.
- Record the package count and seal number on the packing list and send it to the buyer.
VGM
Before loading on the vessel, the shipper must declare the verified gross mass (VGM) of the container under international maritime safety rules. Coordinate with your forwarder to file it on time.